Do you want to ensure your floats, toys, and rafts are ready to go when summertime arrives again? However, if you have floats from last year, you can just throw them in the water and expect it to clean all the grime and muck away. It does not matter how long you let your floats sit in the water, the mildew and mold that has built up on them will not just magically disappear.

If you want to learn some other tips that will help ensure your floats last year after year, without issue or needing to be replaced, keep reading.

Inspect Them Carefully

It's smart to inspect your floats at the start of summertime. If you notice any with damage or other issues, it is a good idea to toss them out or replace them. You should lay the rest of them out and get them ready for a quick cleaning.

One option is to use a 16-ounce spray bottle and fill it with a half of a cup of water and a half of a cup of white vinegar. Spray your floats and then rinse them off with a garden hose.

Remove Mildew and Mold

You can easily use bleach to effectively remove mildew, mold, and germs from your floats. To do this, mix a tablespoon of bleach with a gallon of water. Once you have mixed it well, brush it on top of your float and let it sit there for several minutes.

Be sure once you have scrubbed the float that you wipe it down and dry it fully. For something that isn't as harsh, try mixing just a quarter cup of baking soda with a quart of water. Once you do this, use the same instructions mentioned above.

When you do this, you can remove the slimy film and fully clean the floats. It will also help to remove any strong odors that may have developed. If you have especially dirty floats, do not mix the baking soda with water. Instead, just put the powder directly on a damp sponge and then wipe the float briskly.

Care for the Floats After Each Use

Each time you use a float in the water, be sure to squeeze it out for all foam toys. Make sure you rinse other materials with a hose and then let them dry fully. You should make sure you store the floats properly, too. If you put the floats in a damp and dark location, mildew and mold will form. One way for you to avoid this issue is by drying the floats before putting them away.

Purchase the Best Floats for the Best Results

If you want to avoid issues with your floats, you should make sure to purchase quality options that are designed to last. The best way to do this is by finding a reputable seller. Take some time to learn about the online options and then choose the floats that best suit your needs.

×

Someone recently bought a Jemand kaufte vor kurzem ein

Your cart

×